Tag: homeassistant
-
Home Assistant and nice statistics graphs
One of the things that bothered me in #homeassistant for more than a year was the following: I couldn’t figure out why some entities/sensors can draw nice longterm statistics graphs like this (with average, max, min values): and some show only bulky history charts (10 days of data) like this: #til Today I learned I…
-
Detecting movement in Home Assistant using Ikea Vallhorn sensor
I’ve bought some #Ikea #Vallhorn motion sensors for 8€ a piece. (see info here) Pairing to the #Zigbee network in #HomeAssistant and #Zigbee2MQTT was somehow difficult, which is not usual for Zigbee devices (at least according to my limited experiences with them). Nevertheless, I succeeded in pairing them. Unsuccessful attempts Firstly I tried to pair…
-
Simple tablet charge controller using Sonoff’s ZBMini
I’m using an Amazon #FireHD tablet stuck to my fridge with several magnets and 3D printed case as a #homeassistant dashboard. I read it’s bad for the tablet’s battery if it’s constantly plugged into a charger. Battery can swallow or worse. So I installed Sonoff’s #ZBMini (Zigbee) smart switch into a socket where the charger…
-
When did I change the batteries in my sensors?
Last month I learned about the integration which helps track battery change status in various devices connected to #homeassistant. Today I finally had some time to install #HACS integration (source) called ‘Battery Notes‘ which was written by Andrew. After the installation and HA restart, it automatically found my #Aqara battery devices (#Zigbee buttons, magnetic door…
-
Home Assistant and breaking changes (27. 12. 2023)
I’ve been running #homeassistant for 2 years now and have never dealt with breaking changes. Until today. 1st breaking change: #ESPHome entities are unavailable After updating Home Assistant Core to 2023.12.4 and ESPHome to the latest (Dec. 2023) I’ve noticed ESP entities marked as ‘Unavailable‘. Moreover, all entities had duplicates in the entity list ending…
-
Pimp my dishwasher part 2
In my previous post, I wrote about measuring the consumption of the dishwasher using a Tuya smart socket and Home Assistant. The bottom line was that buying a new one doesn’t pay off. But there’s more to it. Knowing how much it consumes per washing cycle I found an issue with the door microswitch which…
-
How much electricity does 20y old dishwasher consume (Tuya Zigbee smart socket test)
Aliexpress Santa delivered a cheap (10€) Tuya smart socket (Zigbee version). I have several Aquara smart sockets (SP-EUC01) around the house that work really well in #homeassistant. But they cost 20-25€. I wanted to test the #Tuya smart socket this time. Not sure exactly which model it is, Aliex… markets it as “Homekit Tuya Smart…
-
Energy dashboards in Home Assistant
I spent quite some time configuring the Energy dashboard in #homeassistant. My primary objective was to track how much electricity my home consumes, how much my micro #PV produces and how much I return to the grid. Finally, this is the result: Today is a cold and sunny day, so my heat pump consumes a…
-
Tuya 3-phase energy meter and Home Assistant
The issue with spike power readings on phase B / So, if you bought a cheap (~70€) Tuya 3-phase zigbee energy meter (with 3 clamps), you’ve probably noticed strange readings on a phase B and C (39xxx W) in #homeassistant. See the spike: It happens to me when my micro-solar inverter exports energy to the…