Author: Tomi
-
Flashing Xiaomi BLE sensors and integrating it in Home Assistant
Flashing Xiaomi BLE sensors and integrating it in Home Assistant There is no such thing as ‘too much’ temperature and humidity sensors, right? So I bough another 5 Xiaomi Mi BLE sensors (in Nov. 2024) model LYWSD03MMC. I wanted to flash them OTA (over-the-air) with custom firmware as previous 7 sensor (bougth in 2022-23). But…
-
Fediverse Starter Packs
So it looks like Fediverse got its ‘starter packs’ too, similar to Bluesky’s (thanks to Anže and others). Starter Packs are curated lists of fediverse (currently only Mastodon) accounts and you can follow them all at once or the selected ones. Like this one (Webcomic Artists): I think starter packs save a lot of time,…
-
Moodle, SMTP, GMail and App passwords
Configuring outgoing email in Moodle via GMail’s SMTP servers I have to write it down because I will surely forget it. The problem I want to enable email sending from the Moodle server via Gmail / Google SMTP server. If I enter Google Account credentials to Moodle’s SMTP configuration, it doesn’t work. Google Account config…
-
Home Assistant and air quality – Ikea Vindstyrka
Home Assistant and air quality – Ikea Vindstyrka The problem I’d like to monitor air quality in my kitchen/dining room to ventilate the rooms more frequently. Sometimes I simply forget to open windows. But again, there is no problem really. I just like to play with IoT gadgets and spend money on something else than…
-
The state of my Home Assistant in 2024
The state of my Home Assistant in 2024 Update (3. 12. 2024) – Misc integrations, Addons and HACS added. My #homeautomation journey started 4 yrs ago (2020) when I bought 1 Aqara #zigbee hub, 1 room temp. sensor and 1 smart socket (for controling the heating of the office). I started with Aqara app. with…
-
Home Assistant gauge card – manually defined colours
Home Assistant gauge card – manually defined colours This post fits to #TIL (Today I learned) category. The ‘normal’ way to define colours in a ‘gauge’ card is by defining severity from UI gauge settings. There are only 4 colours available in a sequence: blue, green, yellow, red: Standard colours are defined using UI by…
-
3D design and printing with TPU (plant pot stand)
3D design and printing with TPU (plant pot stand) If you’re reading this on fediverse and the layout (embedded pics) is off, here’s the link to the original blog post. The problem: My ceramic pot planted with basil had no stand and the water was flowing everywhere after the watering. Some mold grew under the…
-
Replacing the original air duct and a fan on 3D printer (Sovol SV06)
Replacing the original air duct and a fan on 3D printer (Sovol SV06) If you’re reading this on fediverse and the layout is off, here’s the link to the original blog post with a nice text & pictures layout. It started with this ‘blob of death’. I was printing with nylon, when it happened. Nylon…
-
Make Glances run automatically after Raspberry Pi reboot
Run Glances at RBPI startup If you’re reading this on fediverse and the layout is off, here’s the link to the original blog post with a nice text & pictures layout. In my previous post, I struggled to run glances on my Raspberry Pi Zero W. After a first reboot I stared to my Home…
-
Monitoring RBPi with Glances & Home Assistant in 2024
Monitoring RBPi with Glances & Home Assistant in 2024 If you’re reading this on fediverse and the layout is off, here’s the link to the original blog post with a nice text & pictures layout. Few years ago (2019?) it was like: And voila, I could monitor CPU, disk etc. of my Raspberry remotely via…